WEG presents new SSW900 soft starter series

WEG, a leading global manufacturer of drive technology, presented the new SSW900 series of soft starters at this year’s edition of SPS IPC Drives in Nuremberg (Germany). These compact soft starters, which replace the current SSW06 soft starter series, are designed for industrial and commercial applications.

As high-performance top-end devices with integrated PLC functionality, they provide fully programmable algorithms for regulating induction motors as well as fully flexible torque control. The new series covers output currents from 10 A to 412 A in the wide voltage range of 220 to 575 V AC (three-phase) with four case sizes. Thanks to soft starting and integrated protection functions, the SSW900 ensures energy-efficient and reliable operation of electric motors. The device is suitable for a broad range of applications, including blowers and ventilation fans, axial, radial and centrifugal pumps, metering pumps, stirrers and mixers, conveyor belts, extruders, dryers and industrial ovens, turntables, and ball or hammer mills.

Johannes Schwenger, Head of Product Management Low Voltage and Medium Voltage Drive Systems Europe at WEG, comments: “The SSW900 series of soft starters expands our portfolio in an area which was previously not a focus of our activities in Europe. The new SSW900 devices are easy to use, and the integrated PLC allows the output torque to be adapted to the load and the start-up current to be kept as low as possible. Numerous protection functions are also integrated to ensure reliable operation of electric motors.”

The soft starter supports direct motor connection in wye or delta configuration, as well as wye/delta switching with six motor leads. This allows the three motor phases to be wired directly to the three thyristor pairs of the SSW900. As a result, the soft starter only has to provide 58% of the rated motor current (corresponding to the phase current), allowing a smaller device to be used for the same power level. The device has an integrated bypass contactor for longer service life, optimal space utilisation and lower heat dissipation (nearly zero) in the switchgear cabinet. Ease of use is further enhanced by a real-time clock as well as diagnostic and status query functions. Three different stop methods and a kick-start function expand the scope of potential applications.

The LCD display and a new user interface simplify operation and make programming changes quick and easy for users. Commissioning and programming are assisted by wizard functions. USB functionality integrated in the user interface enables configuration of the soft start parameters using the free Windows-based WPS software, as well as programming of the internal SoftPLC using the free WLP software.

The user interface language options include English, German, Portuguese and Spanish. Users can choose from Modbus RTU, Profibus DP, DeviceNet, Ethernet/IP, Modbus TCP and Profinet I/O industrial communication protocols for device connectivity.

 

Figure captions:
WEG000853_1: The SSW900 soft starter features an LCD display and programming wizards for especially convenient operation

WEG000853_2: The high-performance SSW900 soft starter provides gentle starting and stopping of three-phase induction motors along with comprehensive motor protection

WEG stellt neue Softstarter-Reihe SSW900 vor

WEG, ein weltweit führender Anbieter in der Antriebstechnik, hat auf der diesjährigen SPS IPC Drives in Nürnberg den neuen Softstarter SSW900 vorgestellt. Dieser kompakte Softstarter, der die bisherige Starterreihe SSW06 ablösen wird, wurde für die industrielle und gewerbliche Nutzung entwickelt.

Das leistungsstarke High-End-Gerät mit integrierter SPS bietet vollständig programmierbare Verfahren zur Regelung von Asynchronmotoren und komplett flexible Drehmoment-Steuerung. Die neue Reihe deckt in vier Baugrößen Ausgangsströme von 10 A bis 412 A in dem Weitspannungsbereich 220 - 575V 3AC ab. Durch den sanften Anlauf und die integrierten Schutzfunktionen gewährleistet der SSW900 einen energieeffizienten, zuverlässigen Betrieb von Elektromotoren. Er eignet sich für eine große Bandbreite an Anwendungen, darunter Lüfter/Entlüftungsventilatoren, Axial-, Kreisel-, Zentrifugal- und Dosierpumpen, Rührmaschinen und Mischer, Förderbänder, Extruder, Trockner und Industrieöfen, Drehtische sowie Kugel- und Hammermühlen.

Johannes Schwenger, Leiter Produktmanagement Antriebssysteme Niederspannung und Mittelspannung Europa bei WEG, kommentiert: „Die Softstarter-Reihe SSW900 erweitert unser Portfolio in einem Bereich, in dem wir in Europa bislang noch nicht schwerpunktmäßig aktiv waren. Komfortabel in der Bedienung, sorgt der neue SSW900 mit integrierter SPS dafür, dass das erzeugte Drehmoment an die Last angepasst wird und das Anlaufen mit dem niedrigst möglichen Strom erfolgt. Außerdem sind zahlreiche Schutzfunktionen integriert, die einen zuverlässigen Betrieb von Elektromotoren gewährleisten.“

Der Softstarter erlaubt sowohl einen Direktanschluss von Motoren in Stern- oder Dreieckschaltung als auch eine Strangeinschaltung (Wurzeldreischaltung mit sechs angeschlossenen Leitern). Dies macht es möglich, unmittelbar die drei Motorstränge in die drei Thyristorpaare des SSW900 zu schalten. Das führt dazu, dass der Softstarter nur noch 58 Prozent des Motornennstromes (entspricht dem Strangstrom) führen muss und sich für die gleiche Leistung kleinere Geräte einsetzen lassen. Aufgrund des integrierten Bypass-Schützes sorgen die Geräte für eine verlängerte Lebensdauer, optimierte Raumnutzung und eine Verlustleistungsabgabe im Schaltschrank, die gegen Null geht. Eine Echtzeituhr sowie Diagnose- und Statusabfragen erhöhen ferner den Bedienkomfort. Drei verschiedene Stopp-Methoden und eine Kickstart-Funktion sorgen für eine zusätzliche Applikationserweiterung.

Das LCD-Display und eine neue HMI-Benutzeroberfläche erleichtern die Bedienung und erlauben es dem Anwender, einfach und schnell Programmanpassungen vorzunehmen. Inbetriebnahme und Programmierung werden durch geführte Parametrierung unterstützt. Über die HMI integrierte USB Schnittstelle kann die Softstarterparametrierung mit der kostenlosen, Windows basierten Software WPS und die Programmierung der internen SoftPLC mit der ebenfalls kostenfrei erhältlichen WLP Software durchgeführt werden.

Die Sprachauswahl umfasst neben Deutsch auch Englisch, Spanisch oder Portugiesisch. Die Konnektivität ist wahlweise über die Industrieprotokolle Modbus RTU, Profibus-DP, DeviceNet, Ethernet/IP, Modbus-TCP oder Profinet I/O herstellbar.

Bildunterschrift:
WEG000853_1: Die Softstarter SSW900 sorgen für hohen Bedienkomfort dank LCD-Display und Programmier-Assistenten

WEG000853_2: Die leistungsstarken Softstarter SSW900 ermöglichen einen sanften An- und Auslauf von Drehstrom-Asynchronmotoren und bieten umfassenden Motorschutz

WEG stellt neue Softstarter-Reihe SSW900 vor

WEG, ein weltweit führender Anbieter in der Antriebstechnik, hat auf der diesjährigen SPS IPC Drives in Nürnberg den neuen Softstarter SSW900 vorgestellt. Dieser kompakte Softstarter, der die bisherige Starterreihe SSW06 ablösen wird, wurde für die industrielle und gewerbliche Nutzung entwickelt.

Das leistungsstarke High-End-Gerät mit integrierter SPS bietet vollständig programmierbare Verfahren zur Regelung von Asynchronmotoren und komplett flexible Drehmoment-Steuerung. Die neue Reihe deckt in vier Baugrößen Ausgangsströme von 10 A bis 412 A in dem Weitspannungsbereich 220 - 575V 3AC ab. Durch den sanften Anlauf und die integrierten Schutzfunktionen gewährleistet der SSW900 einen energieeffizienten, zuverlässigen Betrieb von Elektromotoren. Er eignet sich für eine große Bandbreite an Anwendungen, darunter Lüfter/Entlüftungsventilatoren, Axial-, Kreisel-, Zentrifugal- und Dosierpumpen, Rührmaschinen und Mischer, Förderbänder, Extruder, Trockner und Industrieöfen, Drehtische sowie Kugel- und Hammermühlen.

Johannes Schwenger, Leiter Produktmanagement Antriebssysteme Niederspannung und Mittelspannung Europa bei WEG, kommentiert: „Die Softstarter-Reihe SSW900 erweitert unser Portfolio in einem Bereich, in dem wir in Europa bislang noch nicht schwerpunktmäßig aktiv waren. Komfortabel in der Bedienung, sorgt der neue SSW900 mit integrierter SPS dafür, dass das erzeugte Drehmoment an die Last angepasst wird und das Anlaufen mit dem niedrigst möglichen Strom erfolgt. Außerdem sind zahlreiche Schutzfunktionen integriert, die einen zuverlässigen Betrieb von Elektromotoren gewährleisten.“

Der Softstarter erlaubt sowohl einen Direktanschluss von Motoren in Stern- oder Dreieckschaltung als auch eine Strangeinschaltung (Wurzeldreischaltung mit sechs angeschlossenen Leitern). Dies macht es möglich, unmittelbar die drei Motorstränge in die drei Thyristorpaare des SSW900 zu schalten. Das führt dazu, dass der Softstarter nur noch 58 Prozent des Motornennstromes (entspricht dem Strangstrom) führen muss und sich für die gleiche Leistung kleinere Geräte einsetzen lassen. Aufgrund des integrierten Bypass-Schützes sorgen die Geräte für eine verlängerte Lebensdauer, optimierte Raumnutzung und eine Verlustleistungsabgabe im Schaltschrank, die gegen Null geht. Eine Echtzeituhr sowie Diagnose- und Statusabfragen erhöhen ferner den Bedienkomfort. Drei verschiedene Stopp-Methoden und eine Kickstart-Funktion sorgen für eine zusätzliche Applikationserweiterung.

Das LCD-Display und eine neue HMI-Benutzeroberfläche erleichtern die Bedienung und erlauben es dem Anwender, einfach und schnell Programmanpassungen vorzunehmen. Inbetriebnahme und Programmierung werden durch geführte Parametrierung unterstützt. Über die HMI integrierte USB Schnittstelle kann die Softstarterparametrierung mit der kostenlosen, Windows basierten Software WPS und die Programmierung der internen SoftPLC mit der ebenfalls kostenfrei erhältlichen WLP Software durchgeführt werden.

Die Sprachauswahl umfasst neben Deutsch auch Englisch, Spanisch oder Portugiesisch. Die Konnektivität ist wahlweise über die Industrieprotokolle Modbus RTU, Profibus-DP, DeviceNet, Ethernet/IP, Modbus-TCP oder Profinet I/O herstellbar.

Bildunterschrift:
WEG000853_1: Die Softstarter SSW900 sorgen für hohen Bedienkomfort dank LCD-Display und Programmier-Assistenten

WEG000853_2: Die leistungsstarken Softstarter SSW900 ermöglichen einen sanften An- und Auslauf von Drehstrom-Asynchronmotoren und bieten umfassenden Motorschutz

WEG presents new SSW900 soft starter series

WEG, a leading global manufacturer of drive technology, presented the new SSW900 series of soft starters at this year’s edition of SPS IPC Drives in Nuremberg (Germany). These compact soft starters, which replace the current SSW06 soft starter series, are designed for industrial and commercial applications.

As high-performance top-end devices with integrated PLC functionality, they provide fully programmable algorithms for regulating induction motors as well as fully flexible torque control. The new series covers output currents from 10 A to 412 A in the wide voltage range of 220 to 575 V AC (three-phase) with four case sizes. Thanks to soft starting and integrated protection functions, the SSW900 ensures energy-efficient and reliable operation of electric motors. The device is suitable for a broad range of applications, including blowers and ventilation fans, axial, radial and centrifugal pumps, metering pumps, stirrers and mixers, conveyor belts, extruders, dryers and industrial ovens, turntables, and ball or hammer mills.

Johannes Schwenger, Head of Product Management Low Voltage and Medium Voltage Drive Systems Europe at WEG, comments: “The SSW900 series of soft starters expands our portfolio in an area which was previously not a focus of our activities in Europe. The new SSW900 devices are easy to use, and the integrated PLC allows the output torque to be adapted to the load and the start-up current to be kept as low as possible. Numerous protection functions are also integrated to ensure reliable operation of electric motors.”

The soft starter supports direct motor connection in wye or delta configuration, as well as wye/delta switching with six motor leads. This allows the three motor phases to be wired directly to the three thyristor pairs of the SSW900. As a result, the soft starter only has to provide 58% of the rated motor current (corresponding to the phase current), allowing a smaller device to be used for the same power level. The device has an integrated bypass contactor for longer service life, optimal space utilisation and lower heat dissipation (nearly zero) in the switchgear cabinet. Ease of use is further enhanced by a real-time clock as well as diagnostic and status query functions. Three different stop methods and a kick-start function expand the scope of potential applications.

The LCD display and a new user interface simplify operation and make programming changes quick and easy for users. Commissioning and programming are assisted by wizard functions. USB functionality integrated in the user interface enables configuration of the soft start parameters using the free Windows-based WPS software, as well as programming of the internal SoftPLC using the free WLP software.

The user interface language options include English, German, Portuguese and Spanish. Users can choose from Modbus RTU, Profibus DP, DeviceNet, Ethernet/IP, Modbus TCP and Profinet I/O industrial communication protocols for device connectivity.

 

Figure captions:
WEG000853_1: The SSW900 soft starter features an LCD display and programming wizards for especially convenient operation

WEG000853_2: The high-performance SSW900 soft starter provides gentle starting and stopping of three-phase induction motors along with comprehensive motor protection

Images

WEG000853_1 WEG000853_2